Input Shaft, M/T
| Available Thrust Washer | 4th Input Gear (At Input Shaft) | Allowable Clearance | 0 - 0.06 mm |
| Available Shim | Bearing Preload And End Play | Input Shaft End Play | 0 - 0.05 mm |
| Available Thrust Washer | 4th Input Gear (At Input Shaft) | Allowable Clearance | 0 - 0.06 mm |
| Available Shim | Bearing Preload And End Play | Input Shaft End Play | 0 - 0.05 mm |