Front Seat Belt

REMOVAL AND INSTALLATION
1. Slide the seat all the way forward and tilt the seatback toward the front.
2. Remove adjuster cover.
3. Slide the floor anchor cover.
4. Remove floor anchor bolt.
5. Remove shoulder anchor bolt.
6. Remove center pillar upper and lower garnish.
7. Disconnect seat belt pre-tensioner connector.
8. Remove the bolt securing seat belt pre-tensioner retractor, then remove seat belt and seat belt pre-tensioner retractor.
9. Remove bolts securing seat belt adjuster, then remove seat belt adjuster.
10. For Installation, reverse the Removal steps.