Radius Arm: Service and Repair

REMOVAL AND INSTALLATION
Parallel Link And Radius Link





- Remove parallel link and radius link.

- Models, Without ABS -
- When installing front parallel link, make sure that paint mark faces in the correct direction.
- During installation, final tightening must be carried out at curb weight with tires on the ground.
- After installation, check wheel alignment.





- Check parallel link for cracks, deformation and other damage. Replace if necessary.
- Check radius link for cracks, deformation and other damage. Replace if necessary.

Stabilizer Bar





- Remove stabilizer bar.





- When installing stabilizer, align paint marks with inside edge of clamps.





- Install stabilizer bar with ball joint socket properly placed.