Component Tests and General Diagnostics

CONSULT INSPECTION PROCEDURE





1. Turn ignition switch "OFF".
2. Connect "CONSULT" to the data link connector.





3. Turn ignition switch "ON".
4. Touch "START".





5. Touch "IVMS".





6. Touch "IGN KEY WARN ALM", "LIGHT WARN ALM" or "SEAT BELT TIMER".





^ DATA MONITOR and ACTIVE TEST are available for the warning buzzer.





Symptom Chart

DIAGNOSTIC PROCEDURES





Diagnostic Procedure 1 (Lighting Switch Input Signal Check)





Diagnostic Procedure 2 (Key Switch Input Signal Check)





Diagnostic Procedure 3 (Seat Belt Switch Input Signal Check)








Diagnostic Procedure 4