Oil Seal Replacement

DIFFERENTIAL OIL SEAL





1. Drain gear oil from transaxle.
2. Remove drive shafts.
3. Remove differential oil seal.





4. Install differential oil seal.
- Apply multi-purpose grease to seal lip of oil seal before installing.
5. Install drive shafts.

STRIKING ROD OIL SEAL





1. Remove transaxle control rod from yoke.
2. Remove retaining pin.
- Be careful not to damage boot.





3. Remove striking rod oil seal.





4. Install striking rod oil seal.
- Apply multi-purpose grease to seal lip of oil seal before installing.