System Description (For Canada)

DAYTIME LIGHT SYSTEM (FOR CANADA)

The headlamp system on vehicles for Canada contains a daytime light unit. The unit activates the high beam headlamps at approximately half illumination whenever the engine is running. If the parking brake is applied before the engine is started, the daytime lights will not be illuminated. The daytime lights will illuminate once the parking brake is released. After that, the daytime lights will continue to operate even when the parking brake is applied.
Power is supplied at all times
^ through 15 A fuse (No. (53) located in the fuse and fusible link box)
^ to daytime light control unit terminal (3) and
^ to lighting switch terminal (8)
Power is also supplied at all times
^ through 15 A fuse (No. (54) located in the fuse and fusible link box)
^ to daytime light control unit terminal (2),
^ to lighting switch terminal (5) and
With the ignition switch in the ON or START position, power is supplied
^ through 7.5 A fuse [No. (12), located in the fuse block (J/B)]
^ to daytime light control unit terminal (12).
Ground is supplied to daytime light control unit terminal (9) through body grounds (E5) and (E30).