Front

DISASSEMBLY
1. Set strut assembly on vise with Tool, then loosen piston rod lock nut.

WARNING: DO NOT REMOVE PISTON ROD LOCK NUT AT THIS TIME.





2. Compress spring with Tool so that the strut mounting insulator can be turned by hand.





3. Remove piston rod lock nut.

INSPECTION

Shock Absorber Assembly
- Check for smooth operation through a full stroke, both compression and extension.
- Check for oil leakage on welded or gland packing portion.
- Check piston rod for cracks, deformation or other damage.
- Replace if necessary.

Mounting Insulator And Rubber Parts
- Check cemented rubber-to-metal portion for separation or cracks.
- Check rubber parts for deterioration.
- Replace as necessary.

Thrust Bearing
- Check thrust bearing parts for abnormal noise or excessive rattle in axial direction.
- Replace if necessary.

Coil Spring
- Check for cracks, deformation or other damage. Replace necessary.





ASSEMBLY
- When installing coil spring on strut, it must be positioned as shown.





- Install upper spring seat with its cutout facing the outer side of vehicle.