BARO / MAP Sensor Switching Valve: Testing and Inspection

COMPONENT INSPECTION
MAP/BARO Switch Solenoid Valve







With Consult
1. Start engine and warm it up to normal operating temperature.
2. Perform "MAP/BARO SW/V" in "ACTIVE TEST" mode with CONSULT.
3. Check the following.
- Condition: At idle under no-load
- CONSULT display
- Time for voltage to change.







4. If NG, replace solenoid valve.

OR







Without Consult
1. Remove MAP/BARO switch solenoid valve.
2. Check air passage continuity.
3. If NG, replace solenoid valve.