Available Snap Rings and Clearance

1st & 2nd Synchronizer Hub
Allowable Clearance 0 - 0.1 mm (0 - 0.004 inch)
Part Number And Thickness:
32269-03E03 1.95 mm (0.0768 inch)
32269-03EOO 2.00 mm (0.0787 inch)
32269-03E01 2.05 mm (0.0807 inch)
32269-03E02 2.10 mm (0.0827 inch)

3rd & 4th Synchronizer Hub (At Input Shaft)
Allowable Clearance 0 - 0.1 mm (0 - 0.004 inch)
Part No. And Thickness:
32269-03E03 1.95 mm (0.0768 inch)
32269-03EOO 2.00 mm (0.0787 inch)
32269-03E01 2.05 mm (0.0807 inch)
32269-03E02 2.10 mm (0.0827 inch)

5th Main Gear
Allowable Clearance 0 - 0.15 mm (0 - 0.0059 inch)
Part Number And Thickness:
32348-OSE00 1.95 mm (0.0768 inch)
32348-OSE01 2.05 mm (0.0807 inch)
32348-OSE02 2.15 mm (0.0846 inch)
32348-OSE03 2.55 mm (0.1004 inch)