With CONSULT II

III. CRUISE TEST
Check all items listed in Parts 1 through 3.



With CONSULT-II
Using CONSULT-II, conduct a cruise test and record the result.

VEHICLE SPEED WHEN SHIFTING GEARS THROTTLE POSITION:

VEHICLE SPEED WHEN PERFORMING AND RELEASING LOCK-UP:

Print the result and ensure that shifts and lock-ups take place as per "Shift Schedule".







CONSULT-II Setting Procedure
1. Turn ignition switch OFF.
2. Connect "CONSULT-II" to data link connector.
Data link connector is located in the lower instrument panel on driver side.







3. Turn ignition switch ON.
4. Touch "START".







5. Touch "A/T".







6. Touch "DATA MONITOR".







7. Touch "MAIN SIGNALS" or "TCM INPUT SIGNALS".
8. See "Numerical Display", "Barchart Display" or "Line Graph Display".







9. Touch "SETTING" to set recording condition ("AUTO TRIG" or "MANU TRIG") and touch "BACK".
10. Touch "START".







11. When performing cruise test, touch "RECORD".







12. After finishing cruise test part 1, touch "STOP".










13. Touch "STORE" and touch "BACK".







14. Touch "DISPLAY".
15. Touch "PRINT".
16. Check the monitor data printed out..
17. Continue cruise test part 2 and 3.