ABS Function

ABS / HYDRAULIC CIRCUIT DIAGRAM:

ABS / SYSTEM DIAGRAM:

CAUTION: When installing parts, avoid twist and fracture conditions.
Make sure there is no interference with other parts when turning steering both clockwise and counterclockwise.
Brake system is an important safety part. If a brake fluid leak is detected, always disassemble the affected part. If a malfunction is detected, replace it with a new one.

ABS Function
1. During ABS operation, brake pedal lightly vibrates and a mechanical noise may be heard. This is normal.
2. When starting engine, or just after starting vehicle, brake pedal may vibrate or motor operating noises may be heard from engine compartment. This is a normal status of operation check.
3. Stopping distance may be longer than that of vehicles without ABS when vehicle drives on rough, gravel, or snow-covered (fresh, deep snow) roads.
4. EBD is integrated in ABS system.