Air Bypass Valve Actuator: Testing and Inspection

Supercharger:

SUPERCHARGER BYPASS VALVE ACTUATOR





1. Apply air pressure of less than 12 kPa (90 mmHg, 3.54 inHg) to the supercharger bypass valve actuator's lower side hose port and check for any leakage.
2. Check the supercharger bypass valve actuator rod for smooth movement while maintaining the pressure at the specified levels below:

Rod starts to extend at approximately:.................12 kPa (90 mmHg, 3.54 inHg)
Rod is fully extended at approximately:.................33.3 kPa (250 mmHg, 9.84 inHg)
Rod full extended length: ...............................20.83 - 22.71 mm (0.82 - 0.89 inch)