Front Bumper: Service and Repair
Removal and InstallationWhen removing or installing hood, place a cloth or other padding on hood. This prevents vehicle body from being scratched.
Bumper fascia is made of plastic. Do not use excessive force and be sure to keep oil away from it.
Hood adjustment: Adjust at hinge portion.
Hood lock adjustment: After adjusting, check hood lock control operation. Apply a coat of grease to hood lock engaging mechanism.
Hood opener: Do not attempt to bend cable forcibly. Doing so increases effort required to unlock hood.
FRONT BUMPER ASSEMBLY:
FRONT BUMPER ASSEMBLY:
FRONT BUMPER ASSEMBLY
1. Remove push pins securing the fascia to the reinforcement. [A]
2. Remove screws securing the fascia to the fender. [B]
3. Remove bolts securing left and right bumper stays. [C]
4. Remove the push pins securing the fascia to the frame.
5. Remove the fascia.
6. Remove the frame crossbar.
7. Remove the front bumper assembly.
8. Remove the fascia reinforcement.