Vehicle Security System Activation

VEHICLE SECURITY SYSTEM ACTIVATION (WITH KEY OR KEYFOB USED TO LOCK DOORS)
If the key is used to lock doors ground is supplied to smart entrance control unit terminal 11
- through front door key cylinder switch LH terminal 1
- through front door key cylinder switch LH terminal 2
- through body grounds M14 and M68.

If this signal or lock signal from keyfob is received by the smart entrance control unit the vehicle security system will activate automatically.

Once the vehicle security system has been activated smart entrance control unit terminal 38 supplies ground to security indicator lamp terminal 2.

The security lamp will illuminate for approximately 30 seconds and then blink. The vehicle security system is now in armed phase.