Power Supply

VEHICLE SECURITY (THEFT WARNING SYSTEM)

POWER SUPPLY AND GROUND
Power is supplied at all times
- through 7.5 A fuse [No.28, located in the fuse block (J/B)]
- to smart entrance control unit terminal 49
- to key switch terminal 1 and
- to security indicator lamp terminal 1.

With the ignition switch in the ACC or ON position, power is supplied
- through 7.5 A fuse [No.20, located in the fuse block (J/B)]
- to smart entrance control unit terminal 26.

With the ignition switch in the ON or START position, power is supplied
- through 10 A fuse [No.5 located in the fuse block (J/B)]
- to smart entrance control unit terminal 27.

Ground is supplied
- to smart entrance control unit terminals 43 and 64
- through body grounds M14 and M68.