General Specifications
| Center Distance | 154.1 - 154.2 mm | |
| Bend [per 100 mm] | Limit | 0.15 Millimeter (mm) |
| Torsion [per 100 mm] | Limit | 0.30 Millimeter (mm) |
| Piston Pin Bushing Inner Diameter After installing in connecting rod | 20.982 - 20.994 Millimeter (mm) | |
| Connecting Rod Big End Inner Diameter | 53.000 - 53.013 Millimeter (mm) | |
| Side Clearance | Standard | 0.20 - 0.35 Millimeter (mm) |
| Limit | 0.40 Millimeter (mm) | |
| Connecting Rod Bearing Undersize | Standard Crank Pin Journal Diameter "Dp" 49.955 - 49.974 mm | 1.502 - 1.506 Millimeter (mm) |
| Undersize Grind so that bearing clearance is the specified value. | 1.542 - 1.546 Millimeter (mm) | |
| 1.562 - 1.566 Millimeter (mm) | ||
| 1.627 - 1.631 Millimeter (mm) | ||
| Connecting Rod Bearing Clearance | Standard | 0.024 - 0.064 Millimeter (mm) |
| Limit | 0.090 Millimeter (mm) |