| Low Reverse Clutch | Number Of Drive Plates | | 7 Count (ct) |
| Number Of Driven Plates | | 7 Count (ct) |
| Thickness Of Drive Plate | Standard | 1.52 - 1.67 Millimeter (mm) |
| | Wear Limit | 1.40 Millimeter (mm) |
| Clearance | Standard | 0.8 - 1.1 Millimeter (mm) |
| | Allowable Limit | 2.5 Millimeter (mm) |
| Thickness of Retaining Plate | | 6.6 Millimeter (mm) |
| | | 6.8 Millimeter (mm) |
| | | 7.0 Millimeter (mm) |
| | | 7.2 Millimeter (mm) |
| | | 7.4 Millimeter (mm) |
| | | 7.6 Millimeter (mm) |
| | | 7.8 Millimeter (mm) |
| | | 8.0 Millimeter (mm) |
| | | 8.2 Millimeter (mm) |
| | | 8.4 Millimeter (mm) |
| | | 8.6 Millimeter (mm) |
| | | 8.8 Millimeter (mm) |
| | | 9.0 Millimeter (mm) |