Fluid - A/T: Service and Repair

CHANGING TRANSMISSION FLUID
1. Warm up A/T fluid.
2. Stop engine.
3. Drain A/T fluid from drain plug and refill with new A/T fluid. Always refill same volume with drained fluid.

Fluid grade:
Nissan Matic "D" (Continental U.S. and Alaska) or Canada Nissan Automatic Transmission Fluid.

Fluid capacity(With torque converter):
KA24DE
2WD 7.9 l (8-3/8 US qt, 7 Imp qt)

VG33E and VG33ER
2WD 8.3 l (8-3/4 US qt, 7-1/4 Imp qt)
4WD 8.5 l (9 US qt, 7-1/2 Imp qt)

Drain plug:
Tightening Torque : 29 - 39 N.m (3.0 - 4.0 kg-m, 22 - 29 ft-lb)

4. Run engine at idle speed for five minutes.
5. Check fluid level and condition. Refer to "Checking A/T Fluid". If fluid is still dirty, repeat steps 2 through 5.