Clutch Release Bearing: Service and Repair

Removal and Installation





^ Remove release bearing.





^ Install release bearing with suitable drift.





^ Install retainer spring and holder spring.

Inspection





Check the following items, and replace if necessary.
^ Release bearing, to see that it rolls freely and is free from noise, cracks, pitting, or wear.
^ Release sleeve and withdrawal lever rubbing surface, for wear,

Lubrication
^ Apply recommended grease to contact surface and rubbing surface.
^ Too much lubricant might damage clutch disc facing.

Waterproof-for 4WD Model





^ Apply recommended sealant to contact surface of dust cover to transmission case and withdrawal lever and then install dust cover clip.
Recommended sealant: Nissan genuine part (KP11500100), Three Bond TB1212, Loctite Part Number 51813, or equivalent