Main Bearings
| Crankshaft Main Journal Diameter "Dm" | No.1 Main Journal | Grade No.3 | 62.696 - 62.975 Millimeter (mm) | |
| Grade No.4 | 62.963 - 62.969 Millimeter (mm) | |||
| Grade No.5 | 62.957 - 62.963 Millimeter (mm) | |||
| Grade No.6 | 62.951 - 62.957 Millimeter (mm) | |||
| Except No.1 Main Journal | Grade No.0 | 62.967 - 62.975 Millimeter (mm) | ||
| Grade No.1 | 62.959 - 62.967 Millimeter (mm) | |||
| Grade No.2 | 62.951 - 62.959 Millimeter (mm) | |||
| Pin Journal Diameter "Dp" | 49.955 - 49.974 Millimeter (mm) | |||
| Out-Of-Round (X - Y) | Standard | Less Than 0.005 Millimeter (mm) | ||
| Taper (A - B) | Standard | Less Than 0.005 Millimeter (mm) | ||
| Runout [TIR] = Total indicator reading | Standard | Less Than 0.025 Millimeter (mm) | ||
| Limit | Less Than 0.10 Millimeter (mm) | |||
| Free End Play | Standard | 0.050 - 0.170 Millimeter (mm) | ||
| Limit | 0.30 Millimeter (mm) |