Without Consult-II

DESCRIPTION
^ The purpose of this test is to determine overall performance of the A/T and analyze causes of problems.
^ The road test consists of the following three parts:





a) Check before engine is started
b) Check at idle
c) Cruise test





^ Before road test, familiarize yourself with all test procedures and items to check.
^ Conduct tests on all items until specified symptom is founded. Troubleshoot items which check out No Good after road test.

1.CHECK BEFORE ENGINE IS STARTED





1: CHECK O/D OFF INDICATOR LAMP





2: CHECK O/D OFF INDICATOR LAMP





3: CHECK NG ITEM

2.CHECK AT IDLE





1: CHECK ENGINE START





2: CHECK ENGINE START





3: CHECK VEHICLE MOVE





4: CHECK VEHICLE MOVE





5: CHECK SHIFT SHOCK





6: CHECK VEHICLE MOVE





7: CHECK VEHICLE MOVE

3.CRUISE TEST
^ Check all items listed in Parts 1 through 3.





^ Throttle position sensor can be checked by measuring voltage across terminals 41 and 42 of TCM.

CRUISE TEST - PART 1





1: CHECK STARTING GEAR (D1) POSITION





2: CHECK SHIFT UP (D1 TO D2)





3: CHECK SHIFT UP (D2 TO D3)





4: CHECK SHIFT UP (D3 TO D4)





5: CHECK LOCK-UP (D4 TO D4 L/U)





6: CHECK HOLD LOCK-UP





7: CHECK LOCK-UP OFF (D4 L/U TO D4)





8: CHECK SHIFT DOWN (D4 TO D3)

CRUISE TEST - PART 2





1: CHECK STARTING GEAR (D1) POSITION





2: CHECK SHIFT UP AND SHIFT DOWN (D3 TO D4 TO D2)





3: CHECK SHIFT UP (D2 TO D3)





4: CHECK SHIFT UP (D3 TO D4) AND ENGINE BRAKE

CRUISE TEST - PART 3





1: VEHICLE SPEED D4 POSITION





2: CHECK SHIFT DOWN (D4 TO D3)





3: CHECK ENGINE BRAKE





4: CHECK SHIFT DOWN (D3 TO D2)





5: CHECK ENGINE BRAKE





6: CHECK SHIFT DOWN (22 TO 11)





7: CHECK ENGINE BRAKE