Without Consult-II

DESCRIPTION
- The purpose of this test is to determine overall performance of the A/T and analyze causes of problems.
- The road test consists of the following three parts:





1) Check before engine is started
2) Check at idle
3) Cruise test





- Before road test, familiarize yourself with all test procedures and items to check.
- Conduct tests on all items until specified symptom is founded. Troubleshoot items which check out No Good after road test.

1.CHECK BEFORE ENGINE IS STARTED





1: CHECK O/D OFF INDICATOR LAMP





2: CHECK O/D OFF INDICATOR LAMP

2.CHECK AT IDLE





1: CHECK ENGINE START





2: CHECK ENGINE START





3: CHECK VEHICLE MOVE





4: CHECK VEHICLE MOVE





5: CHECK SHIFT LOCK





6: CHECK VEHICLE MOVE





7: CHECK VEHICLE MOVE

3.CRUISE TEST
- Check all items listed in Parts 1 through 3.





- Throttle position sensor can be checked by voltage across terminals 41 and 42 of TCM.

CRUISE TEST - PART 1





1: CHECK STARTING GEAR (D1) POSITION





2: CHECK SHIFT UP (D1 TO D2)





3: CHECK SHIFT UP (D2 TO D3)





4: CHECK SHIFT UP (D3 TO D4)





5: CHECK LOCK-UP (D4 TO D4L/U)





6: CHECK HOLD LOCK-UP





7: CHECK SHIFT DOWN (D4L/U TO D4)





8: CHECK SHIFT DOWN (D4 TO D3)

CRUISE TEST - PART 2





1: CHECK STARTING GEAR (D1) POSITION





2: CHECK SHIFT UP AND SHIFT DOWN (D3 TO D4 TO D2)





3: CHECK SHIFT UP (D2 TO D3)





4: CHECK SHIFT UP (D3 TO D4) AND ENGINE BRAKE

CRUISE TEST - PART 3





1: VEHICLE SPEED D4 POSITION





2: CHECK ENGINE BRAKE





3: CHECK SHIFT DOWN (D3 TO D2)





4: CHECK ENGINE BRAKE





5: CHECK SHIFT DOWN (22 TO 11)





6: CHECK ENGINE BRAKE