Beginning With VIN #343314

DIFFERENTIAL CASE





1. Remove side bearing inner cones.
To prevent damage to bearing, engage puller jaws in groove.
Tool number:
A ST33051 001 (J22888-20)
B ST33061000 (J8107-2)





Be careful not to confuse the left and right hand parts.
2. Spread out lock straps and loosen ring gear bolts in a crisscross fashion.





3. Tap ring gear off differential case with a soft hammer.
Tap evenly all around to keep ring gear from binding.





4. Drive out pinion mate shaft lock pin, with Tool from ring gear side.
Lock pin is caulked at pin hole mouth on differential case.