Before VIN #343314

HOW TO ERASE DTC (WITH CONSULT-II)
- If a DTC is displayed for both ECM and TCM, it needs to be erased for both ECM and TCM.





1. If the ignition switch stays ON after repair work, be sure to turn ignition switch OFF once. WA/T at least 5 seconds and then turn it ON (engine stopped) again.
2. Turn CONSULT-II ON and touch "A/T".
3. Touch "SELF-DIAG RESULTS".
4. Touch "ERASE", (The DTC in the TCM will be erased), then touch "BACK" twice.
5. Touch "ENGINE".
6. Touch "SELF-DIAG RESULTS".
7. Touch "ERASE", (The DTC in the ECM will be erased).