FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Propshaft Center Bearing - Squeal Noise

Classification:
PD01-002

Reference:
NTB01-053

Date:
August 22, 2001

1999-2000 FRONTIER; PROPSHAFT SQUEAL NOISE AT CENTER BEARING

APPLIED VEHICLE:
4WD Frontier (D22) with V6 engine only

SERVICE INFORMATION

Use the procedure in this bulletin to repair a 1999 or 2000 4WD Frontier with V6 engine if it exhibits a high-pitched "squeal" noise in the propshaft center bearing area under hard acceleration. Such a "squeal" if it occurs, may be due to the center bearing rubber insulator deforming under load, and then folding down over the spinning shaft.





If this incident should occur, replace the center bearing (see Figure 1) using the part number given in the PARTS INFORMATION section of this bulletin.

For a detailed procedure on propshaft center bearing replacement, please see Nissan Technical Bulletin NTB00-025 (PD99-002).





PARTS INFORMATION





CLAIMS INFORMATION