Beginning With VIN #343314

DISASSEMBLY AND ASSEMBLY
Service procedures for high clutch are essentially the same as those for reverse clutch, with the following exception:








- Check of high clutch operation





- Removal and installation of return spring





- Inspection of high clutch return springs
Inspection standard: Refer to Specifications.





- Inspection of high clutch drive plate
Thickness of drive plate:
Standard 1.52 - 1.67 mm (0.0598 - 0.0657 inch)
Wear limit 1.40 mm (0.0551 inch)





- Measurement of clearance between retaining plate and snap ring
Specified clearance:
Standard 1.8 - 2.2 mm (0.071 - 0.087 inch)
Allowable limit 2.8 mm (0.110 inch)
Retaining plate: Refer to Application and ID.
Application and ID