Models Beginning With Serial Number 343314

Without CONSULT-II

After a malfunction is repaired, turn ignition switch OFF for at least one second, then back ON. Diagnosis mode returns to User mode. At that time, the self-diagnosis result is cleared.

HOW TO CHANGE SELF DIAGNOSIS MODE - Without CONSULT




From User Mode to Diagnosis Mode
Diagnosis mode can be activated only when a malfunction is detected, by pressing the front door switch LH at least 5 times within 7 seconds after turning the ignition switch ON. SRS will not enter Diagnosis mode if no malfunction is detected.

From Diagnosis Mode to User Mode
To return to User mode while a malfunction is being detected, turn ignition switch OFF, then back ON and press the front door switch LH at least 5 times within 7 seconds.

After a malfunction is repaired, turn ignition switch OFF for at least 1 second, then back ON. Diagnosis mode returns to User mode.