Models Without Power Door Locks

Room Lamp
Power is supplied at all times
- through 7.5 A fuse [No.26, located in the fuse block (J/B)]
- to room lamp terminal +.
On 2 door models, with the room lamp switch in the ON position, ground is supplied
- to room lamp terminal -
- through body grounds M14 and M68.
On 4 door models, with the room lamp switch in the ON position, ground is supplied through the case of the room lamp.
With one or more doors open, with the room lamp switch in the DOOR position, ground is supplied
- to room lamp terminal SW
- through front door switch LH terminal 1 and/or
- through front door switch RH and/or rear door switch LH/RH terminal +.