Intake Door

TROUBLE DIAGNOSIS PROCEDURE FOR INTAKE DOOR
Symptom :
- Intake door position does not change in VENT, B/L or FOOT mode.




Inspection Flow

Step 1:

Step 2:

Step 3:

Step 4:

Step 5:

Step 6:

INTAKE DOOR CIRCUIT SYMPTOM
- Intake door does not operate.




RECIRCULATION CONTROL LINKAGE ADJUSTMENT (TWO DIAL)
1. Move recirculation lever to REC position.
2. Set recirculation lever in REC mode.
3. Pull on outer cable in direction of arrow and then clamp it.
4. After position recirculation control cable, check that it operates properly.