Antenna: Service and Repair

Fixed Antenna Rod Replacement

REMOVAL
1. Remove antenna rod.
2. Remove rubber seal.
3. Remove cowl screen top seal.
4. Remove right wiper arm.
5. Remove right cowl to grille.
6. Remove antenna base bolts.
7. Remove right fender splash shield.
8. Remove audio unit.
9. Disconnect antenna cable from audio unit.
10. Remove attachment clip from fender apron.
11. Remove antenna base and cable.

INSTALLATION
Install in reverse order of removal.

CAUTION: Always properly tighten the antenna rod during installation or the antenna rod may bend or break during vehicle operation.