Fluid - A/T: Service and Repair

1. Warm up A/T fluid.
2. Stop Engine.
3. Drain A/T fluid from drain plug and refill with new A/T fluid. Always refill same volume with drained fluid.
Fluid Grade :
Nissan Matic "D" (Continental U.S. and Alaska) or Canada Nissan Automatic Transmission Fluid.

Fluid Capacity (With Torque Converter) :
8.3 l( (8 - 3/4 US qt, 7 - 1/4 Imp qt)
Drain Plug :
Torque: 29 - 39 Nm (3.0 - 4.0 kg.m, 22 - 29 ft.lb)
4. Run engine at idle speed for five minutes.
5. Check fluid level and condition. Refer to "Checking A/T Fluid". If fluid is still dirty, repeat steps 2 through 5.
Testing and Inspection