Beginning With VIN 343314
| Surface Flatness | Standard | Less Than 0.03 Millimeter (mm) | ||
| Limit | 0.10 Millimeter (mm) | |||
| Cylinder Bore | Inner Diameter | Standard for No. 3 and 4 cylinders | Grade No. 1 | 91.500 - 91.505 Millimeter (mm) |
| Grade No. 2 | 91.505 - 91.510 Millimeter (mm) | |||
| Grade No. 3 | 91.510 - 91.515 Millimeter (mm) | |||
| Grade No. 4 | 91.515 - 91.520 Millimeter (mm) | |||
| GradeNo. 5 | 91.520 - 91.525 Millimeter (mm) | |||
| Grade No. 6 | 91.525 - 91.530 Millimeter (mm) | |||
| Standard except for No. 3 and 4 cylinders | Grade No. 1 | 91.500 - 91.510 Millimeter (mm) | ||
| Grade No. 2 | 91.510 - 91.520 Millimeter (mm) | |||
| Grade No. 3 | 91.520 - 91.530 Millimeter (mm) | |||
| Wear Limit | 0.20 Millimeter (mm) | |||
| Out-Of-Round | X - Y | Less Than 0.015 Millimeter (mm) | ||
| Taper | A - B or A - C | Less Than 0.015 Millimeter (mm) |