Beginning With VIN 343314

SYMPTOM CHART

NOTE: Always check remote controller battery before replacing remote controller.

NOTE: When performing a door locking operation (with early production models) using either the main power window and door lock/unlock switch, the door lock/unlock switch RH, the front door LH lock knob or a multi-remote controller, all the doors will lock and then will immediately unlock if the
- key switch is in INSERTED position (key is in ignition key cylinder) and
- ignition switch is in the OFF position and
- either front door switch LH or RH is in OPEN position (door is open).
When performing a door locking operation (with late production models) using either the main power window and door lock/unlock switch, the door lock/unlock switch RH, the front door LH lock knob or a multi-remote controller, all the doors will lock and then the front door LH will immediately unlock if
- the key switch is in INSERTED position (key is in ignition key cylinder) and
- ignition switch is in the OFF position and
- either front door switch LH or RH is in OPEN position (door is open).




REMOTE CONTROLLER BATTERY CHECK







POWER SUPPLY AND GROUND CIRCUIT CHECK




DOOR SWITCH CHECK







KEY SWITCH (INSERTED) CHECK







DOOR UNLOCK SENSOR CHECK







HAZARD REMINDER CHECK




ROOM LAMP CIRCUIT CHECK