8th Judgement Flicker

DESCRIPTION
The A/T fluid temperature sensor detects the A/T fluid temperature and sends a signal to the A/T control unit.





Wiring Diagram





Connectors




CONSULT REFERENCE VALUE IN DATA MONITOR MODE




TCM TERMINALS and REFERENCE VALUE




Diagnostic Trouble Code (DTC) confirmation procedure
After the repair, perform the following procedure to confirm the malfunction is eliminated.

WITH CONSULT
(1) Start engine.







(2) Select "DATA MONITOR MODE" mode with CONSULT.
(3) Drive vehicle under the following conditions: Selector lever in "D", vehicle speed higher than 20 km/h (12 MPH).



NO TOOLS
(1) Start engine.
(2) Drive vehicle under the following conditions: Selector lever in "D", vehicle speed higher than 20 km/h (12 MPH).




(3) Perform self-diagnosis.







DIAGNOSTIC PROCEDURE

COMPONENT INSPECTION




- Check resistance between two terminals 8 and 9 while changing temperature as shown.

Temperature °C (°F) / Resistance
20 (68) / Approximately 2.5 K Ohms
80 (176) / Approximately 0.3 K Ohms