Clutch Bleeding Procedure

AIR BLEEDING PROCEDURE





1. Bleed air from clutch operating cylinder according to the following procedure.
- Carefully monitor fluid level at master cylinder during air bleeding operation.

a. Top up reservoir with recommended brake fluid.
b. Connect a transparent vinyl tube to air bleeder valve.
c. Fully depress clutch pedal several times.
d. With clutch pedal depressed, open bleeder valve to release air.
e. Close bleeder valve.
f. Repeat steps c through e above until brake fluid flows from air bleeder valve without air bubbles.





2. Bleed air from clutch damper according to the above procedure.
3. Repeat the above air bleeding procedure 1 and 2 several times.