Changing A/T Fluid

1. Warm up A/T fluid.
2. Stop engine.




3. Drain A/T fluid from drain plug and refill with new A/T fluid. Always refill same volume with drained fluid.

Fluid grade:
Nissan Matic "D" (Continental U.S. and Alaska) or Canada Nissan Automatic Transmission Fluid. Refer to "RECOMMENDED FLUIDS AND LUBRICANTS".

Fluid capacity (With torque converter):
2WD 8.1 l (8-5/8 US qt, 7-1/8 Imp qt)
4WD 8.5 l (9 US qt, 7-1/2 Imp qt)

Drain plug:
With Tightening Torque: 29 - 39 Nm (3.0 - 4.0 kg.m, 22 - 29 ft.lb)

4. Run engine at idle speed for five minutes.
5. Check fluid level and condition. Refer to "Checking A/T Fluid". If fluid is still dirty, repeat steps 2 through 5.