Checking Fluid Leakage

Check the lines for improper attachment and for leaks, cracks, damage, loose connections, chafing or deterioration.

1. Run engine between idle speed and 1,000 rpm.

NOTE: Make sure temperature of fluid in oil tank rises to 60 - 80° C (140 - 176° F).

2. Turn steering wheel right-to-left several times.

3. Hold steering wheel at each "lock" position for five seconds and carefully check for fluid leakage.

CAUTION: Do not hold the steering wheel in a locked position for more than 15 seconds.

4. If fluid leakage at connectors is noticed, loosen flare nut and then retighten.

CAUTION: Do not overtighten connector as this can damage O-ring, washer and connector.

5. Check rack boots for accumulation of power steering fluid.