To VIN # 350000

The warning chime is controlled by the smart entrance control unit. Power is supplied at all times
- through 7.5 A fuse [No. 24, located in the fuse block (J/B)]
- to warning chime terminal 1
- to key switch terminal 1.
Power is supplied at all times
- through 10 A fuse [No. 61, located in the fuse block (J/B)]
- to lighting switch terminal 11.
Power is supplied at all times
- through 40 A fusible link (letter f, located in the fuse and fusible link box).
- to smart entrance control unit terminal 1.
With the ignition switch in the ON or START position, power is supplied
- through 7.5 A fuse [No. 11, located in the fuse block (J/B)]
- to smart entrance control unit terminal 11.
Ground is supplied to smart entrance control unit terminal 10 through body grounds M4 and M77.
When a signal, or combination of signals, is received by the smart entrance control unit, ground is supplied
- through smart entrance control unit terminal 23
- to warning chime terminal 3.
With power and ground supplied, the warning chime will sound.

IGNITION KEY WARNING CHIME
With the key in the ignition switch in the OFF or ACC position, and the driver's door open, the warning chime will sound. A battery positive voltage is supplied
- from key switch terminal 2
- to smart entrance control unit terminal 24.
Ground is supplied
- from front door switch LH terminal 1
- to smart entrance control unit terminal 15.
Front door switch LH terminal 2 is grounded through body grounds B11, B22 and D210.

LIGHT WARNING CHIME
With ignition switch OFF or ACC, driver's door open, and lighting switch in 1ST or 2ND position, warning chime will sound. A battery positive voltage is supplied.
- from lighting switch terminal 12
- to smart entrance control unit terminal 25.
Ground is supplied
- from front door switch LH terminal 1
- to smart entrance control unit terminal 15.
Front door switch LH terminal 2 is grounded through body grounds B11, B22 and D210.

SEAT BELT WARNING CHIME
With ignition switch turned ON and seat belt unfastened (seat belt switch ON), warning chime will sound for
approximately 6 seconds.
Ground is supplied
- from seat belt switch terminal 1
- to smart entrance control unit terminal 21.
Seat belt switch terminal 2 is grounded through body grounds B11, B22 and D210.