Inspect For Corrosion In the Driver Side and Passenger Side Front Wheel House Areas

Inspect for Corrosion in the Driver Side AND Passenger Side Front Wheel House Areas

1. Turn the ignition OFF.

2. Set the parking brake.

3. Look behind both front tires (see Figure A).





NOTE:
Turning the tires left and then right will allow a better view.

4. Visually inspect for corrosion and rust on the wheel housing panels and the strut housing panels.

^ Inspect for corrosion and rust on the panels only.





NOTE:
Corrosion or Rust on the struts or other suspension components is not covered by this campaign.

No significant rust found on the panels ON BOTH SIDES.

^ Inspection end.

^ Return the vehicle to the customer.

Significant rust is found on the panels ON ONE OR BOTH SIDES:

^ Go to Determine if Vehicle is Repairable.