From VIN # 350001

Multi-Remote Control System ID Code Entry Procedure

NOTE:

- When a customer loses the remote controller, it is recommended to erase the ID code of the lost remote controller to prevent someone from using the lost remote controller. When the ID code of lost remote controller cannot be specified, all ID codes which have been registered should be erased. It will then be necessary to register the ID codes for the remaining remote controller.

- If you need to activate more than two additional new remote controllers, repeat the procedure "Additional ID code entry" for each new remote controller.

- Entry of maximum four ID codes is allowed. When more than four ID codes are entered, the oldest ID code will be erased.

- Even if the same ID code that is already in the memory is input, the same ID code can be entered. The code is counted as an additional one code.




Remote Controller Battery Replacement