Component Inspection

EVAP CANISTER VENT CONTROL VALVE
Check air passage continuity.

With CONSULT
Perform "VENT CONTROL/V" in "ACTIVE TEST" mode.
If NG, clean valve using air blower or replace as necessary. If portion B is rusted, replace control valve.
Make sure new O-ring is installed properly.

WATER SEPARATOR
1. Check visually for insect nests in the water separator air inlet.
2. Check visually for cracks or flaws in the appearance.
3. Check visually for cracks or flaws in the hose.
4. Check that A and C are not clogged by blowing air into B with A and then C plugged.
5. In case of NG in items 2 - 4, replace the parts.

NOTE:
- Do not disassemble water separator.