Indexed By P Number

P NO. INDEX FOR DTC
*1: In Diagnostic Test Mode II (Self-diagnostic results). These numbers are controlled by NISSAN.
*2: These numbers are prescribed by SAE J2012.
*3: When the fail-safe operation occurs, the MIL illuminates.
*4: The MIL illuminates after TCM (Transmission control module) enters the fail-sate mode in two consecutive trips, if both the "Revolution sensor" and the "Engine speed signal" meet the fail-safe condition at the same time.
*5: While engine is running.
*6:1st trip DTC No. is the same as DTC No.

NOTE:
Regarding V6 models, "-B1" and "BK1" indicate right bank and "-B2" and "BK2" indicate left bank.