Connector Symbols

Most of connector symbols in wiring diagrams are shown from the terminal side.

- Connector symbols shown from the terminal side are enclosed by a single line and followed by the direction mark.

- Connector symbols shown from the harness side are enclosed by a double line and followed by the direction mark.

- Certain systems and components, especially related to OBD, may use a new style slide-locking type harness connector. For description and how to disconnect, refer to "HARNESS CONNECTOR".




Connector guides for male terminals are shown in black.
Connector guides for female terminals are shown in white.




Harness Indication
- Connector numbers (M33) indicate harness connectors.
- Letter designations next to test meter probes indicate harness (connector) wire colors.

Component Indication
- Connector numbers F211 indicate component connectors.