DTC Confirmation Procedure

NOTE: If "DTC Confirmation Procedure" has been previously conducted, always turn ignition switch "OFF" and wait at least 5 seconds before conducting the next test.

With CONSULT
(1) Turn ignition switch "ON" and select "DATA MONITOR" mode with CONSULT.
(2) Meet the following conditions once.
CMPS.RPM (REF):
1,300 - 2,800 rpm (A/T models)
1,500 - 3,100 rpm (M/T models)
VHCL SPEED SE: 64 - 120 km/h (40 - 75 MPH)
B/FUEL SCHDL:
1.7 - 6.4 ms (A/T models)
1.4 - 5.4 ms (M/T models)
COOLAN TEMP/S: 70 - 100°C (158 - 212°F)
Selector lever: Suitable position
(3) Stop vehicle with engine running.