Service Specifications

SERVICE SPECIFICATIONS
Adjusting Shim Thickness / Part Number
1.575 - 1.600 mm (0.0620 - 0.0630 inch) / 48213-B0100
1.550 - 1.575 mm (0.0610 - 0.0620 inch) / 48214-B0100
1.525 - 1.550 mm (0.0600 - 0.0610 inch) / 48215-B0100
1.500 - 1.525 mm (0.0591 - 0.0600 inch) / 48216-B0100
1.475 - 1.500 mm (0.0581 - 0.0591 inch) / 48217-B0100
1.450 - 1.475 mm (0.0571 - 0.0581 inch) / 48218-B0100
Backlash At Pitman Arm Top End [3] 0 - 0.1 mm (0 - 0.004 inch)
End Play [4] 0.01 - 0.03 mm (0.0004 - 0.0012 inch)
Steering Gear Ratio 16.5:1
Steering Wheel Turning Force [1] 24.5 - 29.4 N (5.5 - 6.6 lbs.)
Steering Gear Turning Torque
[2] 0.7 - 1.2 Nm (6.1 - 10.4 inch lbs.)
[5] 0.1 - 0.4 (1 - 4, 0.9 - 3.5) higher
Turns Of Steering Wheel (Lock-To-Lock) 3.4

[1]: At 360° from neutral position and circumference of steering wheel.
[2]: At 360° position from straight-ahead position.
[3]: In a straight ahead positions.
[4]: Between sector shaft and adjusting screw.
[5]: As compared with steering wheel turned 360°.

TIGHTENING SPECIFICATIONS
Gear Housing to Frame 84 - 96 Nm (62 - 71 ft. lbs.)
Sector Shaft Cover Bolts 26 - 32 Nm (20 - 24 ft. lbs.)
Sector Shaft to Pitman Arm Nut 137 - 177 Nm (101 - 130 ft. lbs.)
Lower Joint to Stub Shaft 24 - 29 Nm (17 - 22 ft. lbs.)