Overhaul

DISASSEMBLY AND ASSEMBLY
Refer to the illustration when servicing, noting the following:
1. When disassembling and assembling, unlock steering lock with key.
2. Remove combination switch.





3. Install lock nut on steering column shaft and tighten the nut to 25 - 34 N m (18 - 25 ft. lbs.)





4. Break steering lock self-shear type screws using a drill or other appropriate tool.





5. Install self-shear type screws, then tighten until heads break





6. After installing steering column, check tilt mechanism operation.

INSPECTION
1. When steering wheel does not turn smoothly, check the steering column and replace damaged parts.
2. Check column bearings for damage or unevenness. Lubricate with recommended multi-purpose grease or replace steering column as an assembly, if necessary.
3. Check jacket tube for deformation or breakage. Replace if necessary.





4. When the vehicle is involved in a light collision, check dimension "L1". If it is not within specifications, replace steering column as an assembly.
Column length "L1": 895.0 - 898.6 mm (35.24 - 35.38 inch)