Differential Inspection

DIFFERENTIAL INSPECTION

DIFFERENTIAL SUB-ASSEMBLY

Measure the inner race press-fit shaft diameter of differential sub-assembly, and replace the assembly if the diameter does not meet the standard value.

Standard values

- Converter housing side [F1CJA]
dia.40.026 - 40.051 mm (dia.1.5758 - 1.5768 in)

- Converter housing side [W1CJA]
dia.60.032 - 60.078 mm (dia.2.3635 - 2.3653 in)

- Transaxle case side
dia.40.026 - 40.051 mm (dia.1.5758 - 1.5768 in)