Transfer Oil Change

TRANSFER OIL CHANGE

1. Remove the engine room under cover front B assembly. Service and Repair.)









2. Remove the drain plug and gasket to drain the oil.
3. Install the drain plug and new gasket, then tighten them to the specified torque.
Tightening torque: 32± 2Nm (24± 1 ft-lb)
4. Remove the filler plug and gasket, then fill the oil up to the lower edge of the filler plug hole.

Brand name: DiaQueen LSD gear oil
Quantity: 0.8 dm3 (0.85 quarts)
5. Install the filler plug and new gasket, then tighten them to the specified torque.
Tightening torque: 32± 2Nm (24± 1 ft-lb)
6. Install the engine room under cover front B assembly. Service and Repair.)