Inspection Procedure 4

INSPECTION PROCEDURE 4: Shrill Noise

DIAGNOSIS
STEP 1. Check for entry of air.

Q. Is the power steering fluid foamy?

YES Bleed the air (Refer to Service and Repair). Then go to Step 3.

NO Go to Step 2.

STEP 2. Check for seizure in the oil pump.

Q. Is there seizure?

YES Replace the part (Refer to Service and Repair). Then go to Step 3 .

NO Go to Step 3.

STEP 3. Retest the system.

Confirm that no noise is generated.

Q. Is there noise?

YES Repeat from Step 1.

NO The procedure is complete.