Inspection Procedure 12

INSPECTION PROCEDURE 12: Oil Leakage from Oil Reservoir

DIAGNOSIS
STEP 1. Check the oil reservoir for damage.

Q. Is there damage?

YES Replace the oil reservoir (Refer to Service and Repair). Then go to Step 3.

NO Go to Step 2.

STEP 2. Check for overflowing.

Q. Is there oil overflowing from the reservoir?

YES Adjust fluid level. Then go to Step 3.

NO Go to Step 3.

STEP 3. Retest the system.

Q. Is there oil leakage?

YES Repeat from to Step 1.

NO The procedure is complete.